Weather station

ESP32 Environmental Station v3.3. Monitoring Temp, Hum, Pressure, Wind, Rain, Dust, and Noise.

this is an air monitoring system which tell the oversall air status according to temperature ,humidity, co level, gas level and accordingly tell the aqi status too.

Wemos D1 mini pro, BME280, BH1750, Solar panel 4W, INA219. Deep sleep mode, measurement every 1 hour. 24.01.2025 started

Current outdoor weather readings for Narbethong (3788, Victoria, Australia). Updates every 5 minutes.

This project transforms the Arduino MKR with MKR IoT Carrier into a basic IoT weather station accessible via web browser. It creates a local web server that displays real-time temperature and humidity data.

weather station test - To go on Yacht then Queensland

Weather data

Teste com Esp32; Voltagem e umidade do solo

Test Weather station data using a BME680 (Fields 1,2,3 &7) and BME280 (Fields 4,5 &6) via I2C from Python script running on two Raspberry Pi Pico W. Testing the setup and data logging for future full weather station project with wind vane, anemometer, c

Θερμοκρασία και Υγρασία

Weather Station

Basic weather station in Warsaw, Wilanów measuring temperature, humidity, pressure using: SHT41, BMP280

Yet another temp humidity and other sh*

A weather station, currently collecting: Temperature (BME280) Humidity (BME280) Pressure (BME280) Based on an ESP32 with a solar panel and a Li-ion battery for power. The board remains in deep sleep for the most part. And wakes up every 30 minutes.